Puller spindles and lubricants
All Matra tools with spindles such as M355, M499 / 1/2, M422a, M501 and M282 work much better (more smoothly) if a small amount of lubricant (eg Molykote G-n Metal Assembly Paste) is applied to the thread. This prevents galling of the thread under heavy load and reduces, to a certain extent, unwanted rotation of the other part of the tool.
Replacement for Matra 513 tool – rear swing arm pivot pins
The rear suspension pivot pins of the R26, R27 and R50 – R69S models can be adjusted with the use of the Matra 513 tool. However, no replicas are made of the Matra 513 tool. The alternative is a pin wrench such as PN 31421234399.W (Pin wrench for front fork cap screw R69US, R50/5 – R100) Although the diameter of the pins is just under 4 mm and the holes in the pivot pins are 5 mm, this tool functions well. The alternative is pin wrench 31422000243.W (Pin wrench for front fork cap screw R25/3): the pins have a diameter of just
Read more »
Matra 282 tool
We mill 2 planes on the threaded bushing so that it is possible to use a 22 mm wrench on the threaded bushing. This is necessary in cases where (for instance) the crankshaft bearing is glued to the bearing journal, to prevent the threaded bushing from rotating while tightening the central bolt